|
Manufacturer |
SD |
|---|---|
| Model |
MenuProductProduct classification
Contact US
Hotline：+86 13554758169
Tel：+86 0755-29878225
Vacuum Suction Board Loader
1, closed design to ensure the highest level of safety protection, the top safety cover can be opened, convenient maintenance of the machine hardware processing
2. The suction nozzle is fixed on the moving disk surface with a large powerful magnet, and the position of the suction nozzle can be adjusted to ensure that the circuit board is strongly sucked down. The position of the nozzle can be moved at will (for example, there are small holes on the PCB board, we can move the nozzle head within the PCB range for adjustment
3, stable and balanced width adjustment device (hand control screw adjustment)
4, the front of the machine operation into the PCB board, the door has an opening and install transparent acrylic plate can monitor the working condition inside without opening the door
5, one-time storage of PCB board quantity 220mm height, such as PCB board thickness of 1mm can be stored about 220PCS board
6. Smaller machines cover an area
7, the control system adopts Panasonic PLC control, the operation interface adopts touch screen, equipped with automatic alarm system
8, frame structure adopts sheet metal welding, surface spray painting treatment, color human-machine interface window
9, the lifting mechanism adopts the brake motor lifting setting, the step distance is adjustable, effectively shorten the board time, up to 300 PCBS (0.6 mm thick circuit board) can be stacked.
10, the load transfer structure adopts the stepper motor load transfer mode, start, stop can increase and deceleration setting, stable transmission, not easy to punch plate
11, with standard SMEMA signal port, can be connected with any other equipment online
2. The suction nozzle is fixed on the moving disk surface with a large powerful magnet, and the position of the suction nozzle can be adjusted to ensure that the circuit board is strongly sucked down. The position of the nozzle can be moved at will (for example, there are small holes on the PCB board, we can move the nozzle head within the PCB range for adjustment
3, stable and balanced width adjustment device (hand control screw adjustment)
4, the front of the machine operation into the PCB board, the door has an opening and install transparent acrylic plate can monitor the working condition inside without opening the door
5, one-time storage of PCB board quantity 220mm height, such as PCB board thickness of 1mm can be stored about 220PCS board
6. Smaller machines cover an area
7, the control system adopts Panasonic PLC control, the operation interface adopts touch screen, equipped with automatic alarm system
8, frame structure adopts sheet metal welding, surface spray painting treatment, color human-machine interface window
9, the lifting mechanism adopts the brake motor lifting setting, the step distance is adjustable, effectively shorten the board time, up to 300 PCBS (0.6 mm thick circuit board) can be stacked.
10, the load transfer structure adopts the stepper motor load transfer mode, start, stop can increase and deceleration setting, stable transmission, not easy to punch plate
11, with standard SMEMA signal port, can be connected with any other equipment online
Vacuum Suction Board Loader
Vacuum Suction Board Loader
Vacuum Suction Board Loader
Vacuum plate suction machine operation steps ※ Installation mode
1. Plug the power plug into the power socket.
2. Insert the quick gas plug into the quick gas outlet.
3. Connect the front and rear online signals of the machine to the front and rear devices respectively.
3.1 Connecting signal between the machine and the front machine a. Front machine board signal :X0, 0V
b. This machine needs board signal :Y0, COM0
3.2 Connection signal between the local machine and the rear machine
a. The machine has board signal :Y1, COM1 After the machine needs board signal :X1, 0V
4. Adjust the foot cup and moving equipment to make the Conveyor guide rail of the machine consistent and aligned with the Conveyor guide rail and height of the rear connecting equipment (usually screen printing machine).
5. Set the power switch knob ON the operation panel to the ON position. Then the power indicator lights up.
6. Switch the "vacuum plate/pass through function" to switch the position of the required function.
7. After pressing the start button, the machine enters the selected function running state and the green light is on.
8. In the manual adjustment state, press the "Reset" button first, and then press the "tray up", "tray down", "suction cup up", "suction cup down", "vacuum", "transfer" six buttons to achieve the above six functions respectively.
9. Press the "suction cup rise" button so that the suction arm is in the upper limit position, and the two guide rails are in the clamping state. Open the front door, plug in the crank, and adjust the width of the guide rail to the width of the PCB board required.
10. Adjust the suction nozzle and the hydraulic buffer at the upper end of the roderless cylinder, so that the bottom surface of the suction cup is 3~5mm higher than the PCB board. 11. Place a PCB board on the bottom plate so that it is close to the two positioning edges of the plate suction machine.
1. Plug the power plug into the power socket.
2. Insert the quick gas plug into the quick gas outlet.
3. Connect the front and rear online signals of the machine to the front and rear devices respectively.
3.1 Connecting signal between the machine and the front machine a. Front machine board signal :X0, 0V
b. This machine needs board signal :Y0, COM0
3.2 Connection signal between the local machine and the rear machine
a. The machine has board signal :Y1, COM1 After the machine needs board signal :X1, 0V
4. Adjust the foot cup and moving equipment to make the Conveyor guide rail of the machine consistent and aligned with the Conveyor guide rail and height of the rear connecting equipment (usually screen printing machine).
5. Set the power switch knob ON the operation panel to the ON position. Then the power indicator lights up.
6. Switch the "vacuum plate/pass through function" to switch the position of the required function.
7. After pressing the start button, the machine enters the selected function running state and the green light is on.
8. In the manual adjustment state, press the "Reset" button first, and then press the "tray up", "tray down", "suction cup up", "suction cup down", "vacuum", "transfer" six buttons to achieve the above six functions respectively.
9. Press the "suction cup rise" button so that the suction arm is in the upper limit position, and the two guide rails are in the clamping state. Open the front door, plug in the crank, and adjust the width of the guide rail to the width of the PCB board required.
10. Adjust the suction nozzle and the hydraulic buffer at the upper end of the roderless cylinder, so that the bottom surface of the suction cup is 3~5mm higher than the PCB board. 11. Place a PCB board on the bottom plate so that it is close to the two positioning edges of the plate suction machine.
Previous
Nothing
Next
Nothing
